What are the maintenance mistakes of the hydraulic filter？

In order to make the hydraulic filter work better, the maintenance of the hydraulic filter is very important. Do you know how to maintain the hydraulic filter? What maintenance mistakes do you not know? Now let me take you to understand the maintenance mistakes of the hydraulic filter.

1. Open and clean the hydraulic filter every day.

Generally speaking, the hydraulic filter does not need to be cleaned every day. If it is disassembled too frequently, it is easy to mix dust, which will lead to damage of cylinders and other accessories. Moreover, the filtering effect of too clean hydraulic filters is sometimes not as good as that of some dirty hydraulic filters.
Because part of the dust occupies the air inlet passage of the hydraulic filter, it can prevent smaller particles of dust from entering the filter. Therefore, do not rush to clean the hydraulic filter every day. The cleaning work should be carried out according to the dirty degree of the use environment and the use intensity of the filter.

2. To clean the hydraulic filter more cleanly, pat it hard.

Although the user wants the hydraulic filter to be cleaned as clean as possible, remember not to beat it hard during cleaning. This is not correct, because the dirt particles or oil in the filter cannot be released by forceful tapping, and the filter screen is damaged if it is not properly done, which is not worth the loss.
Also, when cleaning the hydraulic filter, pay attention to blowing it from the inside to the outside with compressed air. If it does the opposite, it will blow in the dirt that needs to be cleaned. In addition, remember to use the special cleaner for the hydraulic filter, and do not use other solvents to clean the filter, so as to avoid unnecessary damage.