The definition of the oil filter machine

Oil filter machine is a filtering device that uses gravity, centrifugation, pressure, vacuum distillation, mass transfer and other technical methods to remove mechanical impurities, oxidation by-products and water in impure oil. The oil filter is mainly used to improve the cleanliness of mechanical and electrical oil, give full play to its best performance and prolong the service life of the equipment.

Function and principle of the oil filter machine
Oil filter, also known as oil filter and oil purifier. Its function is to filter and purify the contaminated oil, and restore or improve the properties of the oil itself. Including the cleanliness, water content, gas content, acid value, viscosity, flash point, insulation strength, color, etc. of oil products. In addition, it can effectively remove impurities in oil products and ensure the safe operation of oil equipment.

Working principle of the oil filter machine
There is a rotor with double jet nozzle inside, which only needs the pressure generated by the oil to provide its driving force. After the equipment is turned on, the oil in the oil tank is sent to the rotor through the pump. After the oil fills the rotor, it is sprayed along the fuel injection nozzle at the lower part of the rotary table, and then the driving force is generated to make the rotor rotate at high speed. Its rotating speed can reach more than 4000-6000r. P.m. and the generated force is more than 2000 times that of gravity. Based on the principle of centrifugal force, impurities are directly driven to separate from the oil.